Windows 98

Installation:
-------------
  Before starting with the installation process, make sure that the 
  adapter is properly installed and configured.

  1.When you plug the adapter in the mother board and power on the 
    Windows 98, the 'Add New Hardware Wizard' window will prompt and 
    says that

    The wizard search for new driver for:
         PCI Ethernet Controller

  2.In the 'Add New Hardware Wizard' window, click 'Next' then it will 
    ask you 'What do you want Windows to do?'. 
    Choose 'Search for the best driver for your device (Recommended)'
    Click 'Next'.

  3.In the 'Add New Hardware Wizard' window, put the driver disk into the 
    floppy drive and choose 'Specify a location:'. 
    Type the following path in the combo list:
    
    EX: A:\WIN98 
    
    in combo list and click 'Next'.

  4.There will show 'A:\WIN98\NETRTS5.INF' in the 'Location of driver'
    field for the device 'TRENDnet TE100-PCIWA/TE100-PCIWN 10/100Mbps PCI 
    Fast Ethernet Card' in the 'Add New Hardware Wizard' window. 
    Click 'Next'.

  5. Windows will appear some messages to insert the WIN98 source disk to
     complete installation.
     
  6.If this is your first time to install the adapter and have not 
    install the protocols and clients for Microsoft and Netware, 
    please do not restart the computer. Go to the Start\Settings\Control 
    and double-click the Network icon to install the other necessary 
    files for the network operation.
    
  7.Then Windows 98 will ask you 'Do you want to restart your computer 
    now?', Click 'Yes' to restart the Windows 98.
